Harley Davidson Heated Grips Fuse Location

If you follow the rudder hose that exits the rear right side of your oil tank it leads to the bottom of the frame under this is the oil plug.

Harley davidson heated grips fuse location. It is located on the right side just under the oil tank. I have checked all the connections and fuses and cannot find a problem. Position the lower switch housing beneath the grip so that the grooves 2 on the outboard side of the switch housing fit over the flange on the end of the grip.

How to Install Harley Davidson Heated grips on 2014 to 2018 Street Glide Step By Step - YouTube. On some models see attachment the circuit is used and a 15 amp fuse is inserted. Lets take a look at where they are and what you ca.

I get battery voltage everywhere I check. Thread the left-side heated grip wire harness all the way through and out the center of the handlebar. The connector at the end of the wire harness on the hand gripsleeve must extend past the left end of the handlebar.

On some models the fuse is not used deadheaded and a 2amp fuse is inserted. Sometimes I find mine just slightly on from me having bumped it with my hand or someone admiring the bike and putting finger where they shouldnt. Route the heated hand grip wires over to the Electrical Connection Harness.

How to Install Harley Davidson Heated grips on 2014 to. Genuine harley heated hand grips. Once you have the connector loose you can crimp your wire to it using a Molex crimper on the wire and a different molex crimper on the outer shielding.

You might find the location of its detent by looking in a shop manual for the several types of connectors the moco uses. Reference the wiring diagram and gather any connectors from the kit. Pulled the left grip this evening and checked for continuity at the connector going to the right grip.